Falls In Via Ferratas

Podobni Video posnetki:
Hop Pad | Snap
An entry level pad from snap, made with recycled polyester on the outside. The f...
Neon Harness | Ocun
It’s easy to see why they’re called the Neon harnesses! Each harness has 4 gear ...
Rope Range | Ocun
Vision 9.1, Spirit 9.5, Cult 9.8, Guru 10. All made by Ocun in the Czech Republi...
Ange Finesse Quickdraw | Petzl
The Petzl QuickDraw range as a whole has had an update, but in particular the An...
The new BetaStick Evo
The original BetaStick was born, designed and built in 2002, in Sheffield to smo...
Opis:
During the mountain guides’ training seminar held on 21 October 2017, we tested and demonstrated various on via ferratas using different equipment.
We used an 87-kg wooden block, and the tests were carried out at the Mojstrana Via Ferrata. The anchors were 2.5 meters apart, and the block was thrown from a height of approximately 1 meter above the upper anchor. The length of the falls was therefore approximately 4.5 meters. This is a reasonable fall length, which can be expected on modern via ferratas.